Power washing in Allen, TX and the wider DFW Metroplex costs $150 to $950+ in 2026, depending on what’s being cleaned and how much of it. A single-surface job like a driveway or deck starts around $150. A full property package — house, driveway, walkways, deck, and fence — runs $550–$950.
The spread comes down to three things: the surface being cleaned, the total square footage, and whether the job needs soft washing (low-pressure plus cleaning agents for delicate surfaces) or pressure washing (high-pressure for concrete and hard surfaces). This guide breaks down real 2026 pricing by surface, explains the soft-wash-vs-pressure-wash cost difference, and shows why bundling usually beats one-off service calls.
Quick Answer — Power Washing Pricing in Allen, TX at a Glance
| Service | Typical Cost | Time Required | Method |
|---|---|---|---|
| Driveway Cleaning | $150 – $300 | 1–2 hours | Pressure wash |
| House Exterior (Siding) | $200 – $450 | 2–4 hours | Soft wash |
| Deck or Patio | $150 – $400 | 1–3 hours | Pressure or soft wash depending on surface |
| Fence Cleaning | $150 – $400 | 1–3 hours | Soft wash for wood, pressure for vinyl |
| Roof Soft Wash | $350 – $700 | 2–4 hours | Soft wash only |
| Multi-Surface Package (2–3 surfaces) | $350 – $600 | Half day | Mixed methods |
| Full Property Package | $550 – $950+ | Full day | Mixed methods |
These ranges reflect standard 2,500–3,500 sq ft homes on typical suburban lots in Allen, McKinney, Plano, and Frisco. Larger properties, two-story homes, and heavily shaded houses with significant mold or algae buildup run toward the top of each range.
Power Washing Cost by Surface — Detailed Breakdown
Driveway Cleaning: $150 – $300
Driveways are the most common single-service power washing request in DFW. Standard two-car driveways (400–700 sq ft) run $150–$250. Extended driveways with front walkway and apron included run $225–$300.
What’s included:
- Full driveway surface pressure wash
- Pre-treatment of oil stains, mold, and algae
- Concrete cleaner/degreaser as needed
- Post-rinse to remove debris
What drives price up:
- Deep-set oil stains (multiple treatments)
- Rust stains from irrigation or metal furniture
- Extensive moss/algae in shaded areas
- Stamped or colored concrete (requires lower pressure)
House Exterior (Siding): $200 – $450
Whole-house exterior cleaning is the highest-return power washing service in DFW — one professional wash removes years of pollen, mildew, mold, and dust buildup that’s otherwise invisible until the day after it’s gone. Standard single-story homes run $200–$350. Two-story homes run $325–$450.
What’s included:
- Soft washing of siding (vinyl, brick, stucco, painted wood, fiber cement)
- Pre-wet of landscaping to protect plants
- Biodegradable cleaning solution application
- Low-pressure rinse from ground level
- Window exterior rinse included
What drives price up:
- Two-story or three-story homes (additional safety equipment)
- Heavy mold/algae on shaded walls (north-facing walls in particular)
- Painted wood siding that requires extra care
- Homes with extensive architectural detail
Deck or Patio Cleaning: $150 – $400
Standard wood decks under 300 sq ft run $150–$225. Larger wood decks or stained concrete patios run $250–$400. Stone patios and travertine require soft washing and run $200–$375.
What’s included:
- Surface pressure wash or soft wash (depending on material)
- Mildew and algae treatment
- Rinse and neutralization
Important note on wood decks: Aggressive pressure washing damages wood fibers, strips stain, and shortens deck life. Professional deck cleaning uses lower pressure with deck-specific cleaners — a process rental-washer DIY often gets wrong.
Fence Cleaning: $150 – $400
Cedar and pine fences (most common in DFW) run $175–$350 depending on linear footage. Vinyl fences run $150–$250. Masonry fences run $200–$400.
What’s included:
- Soft wash for wood (lower pressure to prevent fiber damage)
- Pressure wash for vinyl and masonry
- Algae and mildew treatment
Fence cleaning is almost always bundled with another service. Standalone fence-only calls are rare because travel and setup time don’t scale well with the job size.
Roof Soft Wash: $350 – $700
Roof cleaning in DFW is always soft wash — never pressure wash. High-pressure on shingles strips granules and voids manufacturer warranties. Roof soft wash uses low pressure with algaecide to kill black algae streaks (gloeocapsa magma) that are common on North Texas shingles, especially on north-facing roof slopes.
Typical pricing:
- Single-story roof (2,500–3,500 sq ft home): $350–$500
- Two-story roof: $475–$700
- Heavily shaded or algae-covered roofs: top of range
Full Property Package: $550 – $950+
The best per-surface value for homeowners who want everything cleaned in a single service visit. Most DFW homeowners who sign up for a full property package end up paying 25–35% less per surface than they would booking each separately.
Typical inclusions:
- House exterior soft wash
- Driveway and walkway pressure wash
- Deck or patio cleaning
- Fence cleaning
- Gutter exterior surface wash
- All landscaping protection and post-service cleanup
The bundle math: individual service totals for a typical 2,800 sq ft home would be around $200 (house) + $225 (driveway) + $200 (deck) + $250 (fence) + $75 (walkways) = $950 booked separately. The same job as a full property package runs $650–$750 — a $200–$300 savings for the exact same work.
Soft Washing vs Pressure Washing — Why the Method Affects Price AND Outcome
This is the single most misunderstood part of power washing pricing in DFW. The two methods serve different purposes, and using the wrong one damages the surface being cleaned.
Pressure Washing (High Pressure + Water)
Uses 1,500–4,000 PSI of water pressure to physically blast dirt, mold, and debris off hard surfaces. Right for: concrete driveways, brick patios, stone walkways, masonry walls, vinyl fences.
Wrong for: roofs, siding, painted wood, wood decks, soft masonry, window seals. High pressure on these surfaces causes visible damage — stripped paint, forced water behind siding, split wood fibers, cracked caulking around windows.
Soft Washing (Low Pressure + Cleaning Solutions)
Uses low-pressure water (under 500 PSI — often comparable to a garden hose) combined with biodegradable cleaning solutions that chemically break down mold, mildew, algae, and organic buildup at the root. Right for: roofs, vinyl/wood/painted siding, stucco, painted surfaces, wood decks, wood fences.
Why soft washing sometimes costs more per sq ft: the cleaning solutions cost money, application is slower, and pre-treatment plus rinse adds time. But soft washing is the only safe method for the surfaces that need it. A cheap “pressure wash everything” quote on siding or a roof is a red flag — that quote will end in damage.
The practical pricing difference: soft wash adds $25–$75 per surface compared to a pure pressure wash, but prevents $500–$5,000 in siding replacement or roof repair that aggressive pressure washing causes.
Free on-site quote — no obligation, same week in most cases.
Our team will walk your property, identify which surfaces need soft wash vs pressure wash, and give you an exact written price before any work starts. No high-pressure sales tactics.
DIY Rental vs Professional Power Washing — The Real Math
The “just rent a pressure washer” argument sounds good until you actually run the numbers. Here’s the honest comparison for a full-property wash in DFW.
DIY Rental Approach
| Line Item | Typical Cost |
|---|---|
| Pressure washer rental (1 day from Home Depot or Lowe’s) | $75–$110 |
| Fuel (gas-powered washers) | $15–$25 |
| Surface cleaners and rotary nozzle attachments | $30–$60 |
| Chemicals (house wash solution, concrete degreaser) | $35–$70 |
| Hose extensions and safety gear | $20–$45 |
| Total DIY cash cost | $175–$310 |
| Time investment | 6–10 hours for an amateur |
| Risk of damage | $500–$5,000 in potential siding, paint, or window damage |
Professional Full Property Package
| Line Item | Typical Cost |
|---|---|
| Full property package | $550–$950 |
| Time investment | 0 hours (you’re not there) |
| Risk of damage | Covered under contractor insurance |
When DIY actually makes sense:
- Single driveway cleanup (small area, concrete only, no risk)
- You already own a pressure washer and know how to use it
- You have experience with soft-wash chemicals and techniques
When professional makes sense (most cases):
- Multi-surface projects
- Any house exterior, siding, or roof cleaning
- Wood decks or painted surfaces
- Two-story homes
- Anyone who values their weekend
What Drives Power Washing Costs in DFW
Five factors explain the spread between low-end and high-end pricing in the Allen / DFW market.
1. Square Footage and Surface Area
The primary cost driver. A 1,800 sq ft single-story home costs less than a 4,500 sq ft two-story.
2. Surface Material and Method Required
Concrete pressure wash is faster and cheaper than soft washing stucco or wood.
3. Access and Setup Difficulty
Narrow side yards, locked gates, landscape beds against the house, and limited water access all add setup time. Two-story and three-story homes require more ladder safety equipment.
4. Condition of the Surface
A home washed annually cleans fast. A home that hasn’t been washed in 5+ years needs pre-treatment, longer dwell time on cleaning solutions, and often a second pass.
5. Bundle Discounts
Single-surface calls price higher per square foot than multi-surface packages because travel time and setup costs are fixed. Combining services always lowers the per-surface rate.
How Often to Power Wash Your Home in North Texas
DFW’s combination of heat, humidity, and pollen creates ideal conditions for mold, mildew, and algae growth. Recommended frequency:
| Surface | Recommended Frequency |
|---|---|
| House exterior | Once per year (spring is ideal) |
| Driveway and walkways | Once per year |
| Wood deck | Every 12–18 months |
| Fence | Every 18–24 months |
| Roof soft wash | As needed — check for black algae streaks on north-facing roof slopes |
| Heavily shaded homes | Consider twice-yearly house wash (spring + fall) |
The best window for a spring power wash in Allen and the wider DFW Metroplex is mid-March through May — after pollen season winds down and before summer heat makes cleaning solutions flash-dry before they can work. Pre-holiday fall washes (October–early November) are the second-best window for homeowners hosting.
What to Expect from Power Washing with JD Ventures Builds
Our power washing process is designed to protect your property first, clean it second.
- Free on-site quote — we walk the property, identify which surfaces need which method, and give you a written price with no pressure
- Plant and landscaping protection — pre-wet of all adjacent plants, runoff direction management
- Service day — soft wash and pressure wash methods applied to the appropriate surfaces; we don’t pressure wash things that shouldn’t be pressure washed
- Final walkthrough — we confirm every surface before calling the job complete
Same-week scheduling is typical. Same-day service is sometimes available for single-surface jobs during slower periods.
Frequently Asked Questions About Power Washing Cost in Allen, TX
How much does power washing cost in Allen, TX?
Power washing in Allen, TX and the DFW Metroplex costs $150 to $950+ in 2026 depending on scope. Single-surface jobs (driveway, deck, or fence) start at $150. Multi-surface packages run $350–$600. Full property packages covering house, driveway, deck, and fence run $550–$950. Larger homes and two-story properties price toward the top of each range.
Is it cheaper to pressure wash the house yourself?
Renting equipment and supplies for a DIY full-property wash costs $175–$310 in materials plus 6–10 hours of your time. That compares to $550–$950 for a professional full-property package that takes you zero hours and carries no damage liability. DIY makes sense for small concrete-only jobs; professional service wins for anything involving siding, roofs, or wood surfaces where damage risk is real.
Is power washing safe for my siding and painted surfaces?
Only when the correct method is used. High-pressure power washing damages vinyl siding, strips paint, and forces water behind cladding. Siding and painted surfaces require soft washing — low pressure combined with cleaning solutions. A professional crew knows which method each surface requires. “Pressure wash everything” quotes are a red flag.
What’s the difference between soft washing and pressure washing?
Pressure washing uses 1,500–4,000 PSI of water pressure to blast hard surfaces clean — right for concrete, brick, and masonry. Soft washing uses low pressure combined with biodegradable cleaning solutions to chemically kill mold and algae at the root — required for roofs, siding, painted wood, and any surface that high pressure would damage.
How often should I power wash my home in North Texas?
Annually for the house exterior and driveway. Every 12–18 months for wood decks. Every 18–24 months for fences. Homes with heavy tree cover or significant mold/algae growth benefit from twice-yearly cleaning. The best window for a spring wash in DFW is mid-March through May.
Ready for a Power Washing Quote in Allen, TX?
Get a free on-site quote from Allen’s owner-operated power washing crew. We’ll identify exactly which surfaces need which method, give you a written price with no surprise add-ons, and often schedule same-week service.
Schedule Your Free Quote → • Call (972) 741-9702 • Learn About Our Power Washing Services →
Serving Allen, McKinney, Plano, Frisco, Richardson, Garland, Dallas, and the greater DFW Metroplex.
